RIGOL DS6000 Series - Manual (Page 69)

RIGOL
DS6000 Quick Guide 19
For example: denotes that CH1 is selected as the trigger source.
11. Trigger Level
 at the right of the screen is the trigger level label and the trigger
level value is displayed at the upper-right corner of the screen.
 When Using TRIGGER LEVEL to modify the trigger level, the
trigger level value will change with the up and down of .
Note that in slope trigger, there are two trigger level labels ( and ).
12. CH1 Vertical Scale
 Display the voltage value per grid of CH1 waveform vertically.
 Use VIRTICAL
SCALE to modify this parameter.
 The following labels will be provided according to the current channel
setting: channel coupling (e.g. ), bandwidth limit (e.g. ) and input
impedance (e.g.
). The situations of CH2, CH3 and CH4 are similar to
this.
13. CH2 Vertical Scale
 Display the voltage value per grid of CH2 waveform vertically.
 Use VIRTICAL SCALE to modify this parameter.
 The following labels will be provided according to the current channel
setting: channel coupling, bandwidth limit and input impedance.
14. CH3 Vertical Scale
 Display the voltage value per grid of CH3 waveform vertically.
 Use VIRTICAL
SCALE to modify this parameter.
 The following labels will be provided according to the current channel
setting: channel coupling, bandwidth limit and input impedance.
15. CH4 Vertical Scale
 Display the voltage value per grid of CH4 waveform vertically.
 Use VIRTICAL
SCALE to modify this parameter.
 The following labels will be provided according to the current channel
setting: channel coupling, bandwidth limit and input impedance.
16. Message Box
Display prompt messages.
17. Notification Area
Display system time, sound icon, battery icon and USB flash device icon.