RIGOL DS6000 Series - Manual (Page 68)

RIGOL
DS6000 Quick Guide 18
2. Channel Label/Waveform
Different channels are marked by different colors and the color of the
waveform complies with the color of the channel.
3. Status
Available states include: RUN, STOP, T’D (triggered), WAIT and AUTO.
4. Horizontal Time Base
 Represent the time per grid on the horizontal axis on the screen.
 Use HORIZONTAL
SCALE to modify this parameter. The range
available is from 500 ps to 50 s.
5. Sample Rate/Memory Depth
 Display the current sample rate and memory depth of the oscilloscope.
 Use HORIZONTAL
SCALE to modify this parameter.
6. Waveform Memory
Provide the schematic diagram of the memory position of the waveform
currently on the screen.
7. Trigger Position
Display the trigger positions of the waveform in the waveform memory and
on the screen.
8. Trigger Position
Use HORIZONTAL POSITION to modify this parameter. Press down
the knob to automatically set the parameter to zero.
9. Trigger Type
Display the currently selected trigger type and trigger condition setting.
Different labels are displayed when different trigger types are selected.
For example: represents triggering on the rising edge in “Edge” trigger.
10. Trigger Source
Display the trigger source currently selected (CH1-CH4, EXT, EXT/5 or AC
Line). Different labels are displayed when different trigger sources are
selected and the color of the trigger parameter area will change accordingly.
waveform on the
screen