Install the data logger software – Retrotec DM32 Data Logger User Manual
Page 4
Page 4 of 27
©Retrotec Inc. 2014
2. Install the Data Logger Software
The latest version of the Data Logger software is always available on the internet.
You can install the Data Logger as part of the DM32 Software Suite or individually.
For the software suite, which also includes the DM32 Configurator and the Virtual Gauge Software, use:
When your computer is connected to the internet, you can use the following link to download an
installer for the software, or to install the software directly on your computer. Once installed, you can
uninstall using the procedure outlined in section 10, from your computer Control Panel. Once installed,
every time you launch the program and are connected to the internet, it will check for updates and offer
to download them and update your Data Logger software.
Click on the “Install” button in the window that opens, as shown in Figure 1: Install the Data Logger
software from the internet.
Follow all the steps in the figures that follow in order to install the software on your computer. If you
are using the Software Suite installer, the data logger will be one of three applications that you will
install.
Figure 1: Install the Data Logger software from the internet