Retrotec DM32 Data Logger - Manual (Page 10)

Page 10 of 27
©Retrotec Inc. 2014
4.2 Find DM32s (all models)
All powered up Retrotec DM32s connected to the computer will be found and added to the “Connected
Gauges” list when [Connect to DM32] is clicked in the “Gauge Connection” section as shown in Figure
13. Any DM32s that are powered down but connected to mains power will also be found.
Figure 11: Find DM32s connected to computer by clicking [Connect to DM32]
The Data Logger can find DM32s that are connected to the computer. Since the DM32s can be
connected to the computer multiple ways, the user can specify how the Data Logger looks for gauges.
Normally the Data Logger will find gauges connected in any way to the computer, but the “DM32
Advanced” drop down shown in Figure 12 lets the user specify which connection types to check.