RISCO Group RISCO Application Server - Manual (Page 13)

13
Arm Only There are no restrictions in the number of Arm Only Codes (as long as
they don't exceed the number of codes remaining in the system). Arm
Only Codes are useful for workers who arrive when the premises are
already open, but because they are last to leave, they're given the
responsibility to close the premises and arm the system. The users with
Arm Only Codes have access for arming one or more partitions.
Duress When coerced into disarming the system, the user can comply with the
intruder's wishes while sending a silent duress alarm to the Central
Station. To do so, a special duress code must be used, which when
used, will disarm the system in the regular manner, while
simultaneously transmitting the duress alarm. In any other situation
the Duress authority level behaves as the same as the User authority
level.
To display the System Users and Codes page:
1. On the Menu Bar, click Settings.
2. Click System Users and Codes. The System Users and Codes page is displayed.
Figure 11: System Users and Codes Page
To add a new system user:
1. Click Add New User at the bottom of the table; the Add New System User page
opens.