RISCO Group LightSYS - Manual (Page 3)

LightSYS Quick User Guide 3
Setting and Changing System Time and Date
1. Press and enter grand master code followed by .
2. Using the arrow keys, scroll to the option Clock and press .
3. The display will show Time & Date. Press .
4. Enter the correct time in 24-hour format and date. For entering the date use the
keys to move the cursor and the / key to toggle among the
choices.
5. Press to save your settings.
SMS Control Commands
Controlling the System through SMS
(Note: Available only if your LighSYS is equipped with the GSM module)
SMS Structure: [User Code][Command]
Full arm: [Code] A
Home Arm: [Code] H
Group Arm: [Code][G][Select Group
A/B/C/D])
Full Disarm: [Code] D
Partition Arm: [Code] A [Partition No.]
Partition Disarm: [Code] D [Partition
No.]
Bypass zone: [Code] B [Zone number]
Unbypass zone: [Code] UB [Zone number]
Activate Output: [Code] UOON [UO No.]
Deactivate Output: [Code] UOOFF [UO
No.]
Get system status: [Code] ST
Get SIM credit level: [Code] CR
Change FM number: [Code] FMPHONE
[FM serial number] NEW [New Phone
No.)
Examples:
To arm the system send SMS: 1234A
To arm partition 1 and 2 send SMS: 1234A12
To disarm partition 1 send SMS: 1234D1
Notes:
1. Command words are not case sensitive (they can contain both capital, small or mixed letters).
2. A separator between command words is not required, although it is accepted.
3. Default grand master code is 1234.