Specifications – RISCO Group WL Supervised Smoke User Manual
Page 12
Wireless Supervisor Photoelectric Smoke Detector
12
Specifications
In order to continue improving the product, RISCO Group reserves the right to
change specifications and/or designs without prior notice.
Note:
Smoke detectors are not to be used with detector guards unless the combination
has been evaluated and found suitable for that purpose.
Voltage:
6 volt
Typical Average Standby
Current:
0.04mA
Typical Test Current:
55mA
Typical Alarm Current:
55mA
Peak Trouble Pulse Current:
4.73mA
Peak Pulse Current:
0.074mA
Typical Battery Life:
3 years
Battery Type:
2xCR123 3V Lithium battery
Low Battery Threshold:
5.2 Volt
Low Battery Beep rate:
One beep every 30 seconds
Low Battery Life:
At least 30 days from warning signal
Operating Temperature:
-10°C to 40°C (14°F - 104°F)
Operating Humidity:
10% to 85% RH, no condensation or icing
Color:
White
Dimensions:
Diameter: 148 mm (5.83”)
Height: 53 mm (2”)
Alarm Sound Level:
Exceeds 85dB at 3m (10 feet)
Transmitter Characteristics:
Nominal Center Frequency
RWT33S86800A and 74015 : 868.65 MHz
RWT33S43300A: 433.92 MHz
Supervision Time
15 min. for 868.65 MHz /
65 min. for 433.92 MHz