RISCO Group MAP Editor Installer - Manual (Page 16)

Map Editor Installation Manual
Uncontrolled when printed © RISCO Group 10
14. Click Next. The Change Configuration dialog box appears. You need to replace localhost with the
server name where your application will be pointing.
Figure 12: Change Configuration
15. Replace ‘localhost’ with where the AMAC services are installed and running. Enter the
server name. For example, enter 01HW183344.
Note: By default, each service uses a port through which the client communicates with the server.
When you point the client application to the machine where AMAC or RMAC service is running,
ensure that you specify the port number which should be used for the communication between
Service and Client. A same port may not be used for AMAC and RMAC. When you want to use
a different port, specify the port number in the format : .
16. Click Next. The Ready to Install the Program dialog box appears.