Primare BD32 universal player - Manual (Page 11)

B d 3 2 u s e r g u i d e
Internet connection through wireless adaptor
• The wireless adaptor included in the BD32 package has been pre-configured to work with the BD32
player. It is compatible with 802.11b/g/n 2.4GHz wireless networks.
• Make sure the broadband Internet connection is available and the Wi-Fi function on your wireless
router or access point has been turned on, then plug the adaptor into the USB2.0 port on your BD32.
• After the physical connection, some network configuration is required. Please refer to the Network
Setup section on page 33 for details.
• A 2-metre USB extension cable is also included in the package. Connect it between the USB port on
the player and your wireless adaptor if needed.
Custom Installation
External IR (Infrared Remote) Installation
The Primare BD32 Blu-ray Disc Player features an IR IN port on its back panel. If the player is to be
installed in an equipment cabinet where direct line-of-sight is not available for remote control, your custom
home theater installer can purchase an external IR Remote Sensor and plug it into the IR IN port. Place
the sensor head at a location where there is direct line-of-sight to ensure reliable operation.
NOTE
When an external IR sensor is plugged in, the original IR sensor window on the front panel will
be disabled.
Primare cannot guarantee that the IR IN port will be compatible with devices that are not
manufactured by Primare.
Connecting the IR IN port to an incompatible device may result in damage to the connected
device or the player.
RS232 Control
The BD32 has an RS232 control port and can be integrated into most custom home theater control
systems. Please ask your custom installer to contact Primare for the RS232 control protocol.