Precision Digital PD663 - Manual (Page 34)

PD663 Loop-Powered Meter Instruction Manual
34
QUICK USER INTERFACE REFERENCE
Scale
Run Mode
Calibrate
Display
Max/Min
dd.dd
in2
d1
in1
ddd.d
dddd
d.ddd
Pushbutton Function
Menu
Go to Programming Mode, leave Programming Mode, and Max/Min
Mode. Hold for 5 seconds to access Advanced Features.
Right Arrow Move to next digit or decimal point position. Reset Min/Max.
Up
Arrow Move to next selection or increment digit. Go to Max/Min Mode.
Enter
Accept selection/value and move to next selection.
Max/Min Mode
While in Run Mode, pressing Up Arrow will initiate Max/Min Mode. Up Arrow toggles
between Max & Min displays, and Right Arrow resets the Max/Min to the current
value. Press Menu or wait 10 seconds to return to Run Mode. Pressing Enter will
disable the 10 second timeout and continuously flash Max or Min.
Decimal
d2
Program
Run
Max &
Min
Advanced
Features
Up Arrow
Menu
Menu
Menu
Menu
Operational Modes
in2
d1
in1
d2
*Access by pressing Right arrow twice
Press & hold Menu for 5
seconds to access Advanced
Features Menu
Filter
Initial
Calibrate
Information
*Factory
Defaults
Hold
Menu
Function