Precision Digital PD663 - Manual (Page 20)

PD663 Loop-Powered Meter Instruction Manual
20
Main Menu Display Functions & Messages
The meter displays various functions and messages during setup, programming,
and operation. The following table shows the main menu functions and
messages in the order they appear in the menu.
Display Parameter Action/Setting
dp Decimal point
Set decimal point
SCL Scale
Enter the Scale menu
Npt Number of Points
Set number of linearization points
in1
Scale Input 1
Input signal 1 value (mA)
D1
Scale Display 1
Scaled value for input 1
in2
Scale Input 2
Input signal 2 value (mA)
D2
Scale Display 2
Scaled value for input 2
CAL
Calibrate
Enter the Calibrate menu
Npt
Number of Points
Set number of linearization points
in1
Calibrate Input 1
Read input signal 1
D1
Calibrate Display 1
Enter value for input 1
in2
Calibrate Input 2
Read input signal 2
D2 Calibrate Display 2
Enter value for input 2
Setting the Decimal Point (dP)
Decimal point may be set with up to three decimal places or with no decimal
point at all.
Pressing the Right or Up arrow moves the decimal point one place to the right
until no decimal point is displayed, then it moves to the left most position.
dP dd.dd
or
Select Decimal Point
Next