Precision Digital PD603 - Manual (Page 22)

Sabre P Model PD603 Process Meter Instruction Manual
22
Scaling the Meter (ScAL)
The process inputs (4-20 mA and
10 VDC) can be scaled to display
the process in engineering units.
A signal source is not needed to scale the meter; simply program the
inputs and corresponding display values.
dis1 0 0 .0
Press Enter to Accept Setting
inp2
Scale
Input 2
inp1
Set Input 1
Value
scal
0 4.00
Set Display 1
Value
Press Up to Set Digit Value
Press Right to Select Next Digit
Press Menu to Exit at any Time
For instructions on how to program
numeric values see Setting Numeric
Values, page 18.