Epson EQUITY Y14499113001 - Manual (Page 78)

The OPERATION MENU
After the power-on self test completes successfully, the diagnostics start
and you see the OPERATION MENU:
OPERATION MENU
1 - S e t u p
- Format hard disk
- Format diskette
- System diagnostics
- Prepare hard disk for moving
- Exit to DOS fur more utilities
Enter selection number:
You select one of the diagnostics programs by pressing a number from
1 to 5 and pressing Enter. This manual describes each menu item in the
order listed on the OPERATION MENU.
Option 3, Format diskette, is included on the OPERATION MENU for
convenience only. This option lets you format diskettes for use by the System
diagnostics tests without exiting from the diagnostics programs.
To use the extra utility programs on the diagnostics diskette (which do
not appear on this menu), select 0 from the OPERATION MENU. Then
start the utility from the MS-DOS prompt.
Exiting Diagnostics
Option 0 exits the diagnostics programs in one of the following ways:
l
If you have not run a diagnostics program, you see this selection on the
OPERATION MENU:
- Exit to DOS for more utilities
In this case, when you press 0 and Enter, you see the MS-DOS prompt.
1-2