Epson EQUITY Y14499113001 - Manual (Page 86)

Move the cursor to the desired communication speed and press Enter.
To set the type of parity check, move the cursor to Parity and press
Enter. The screen displays:
I
None
Odd
Even
Move the cursor to the correct type of parity check and press Enter.
To change the data length, move the cursor to
Data length
and press
Enter. The number changes to either 7 or 8, whichever was not displayed
before. Press Enter again if you want to reselect the previous number.
To change the number of stop bits, move the cursor to Stop bits and
press Enter. The number changes to either 1 or 2, whichever was not dis-
played before. To reselect the previous number, press Enter again.
When you finish changing serial port settings, move the cursor to the
Exit
option in the main Setup menu. Then exit the program as described in
the beginning of this chapter.
2-6