Epson EQUITY Y14499113001 - Manual (Page 13)

Before you connect the cables, take a look at the rear and front panels of
the main unit.
The rear panel
Look at the rear panel to identify the Equity I+ input/output ports.
Figure 1-2 shows where you connect the peripheral devices.
WARNING: Do not connect the power cord until you have con-
nected all peripheral devices. Always check to see
that the power switch is off before you connect or
disconnect any peripherals.
AC outlet Power inlet \
- -
- -
I//
Parallel port
RS-232C serial port access slots
Figure 1-2. Rear panel
Here are brief descriptions of each of the ports:
l
AC power outlet. Auxiliary power outlet. Some monitors (and other
types of peripherals) can be plugged into the main unit here, instead of a
wall outlet. The main unit’s power switch controls the monitor or
peripheral connected to this outlet. Power consumption should not
exceed 80 watts.
l
AC power inlet. Supplies electrical power to the computer. Always turn
the power switch off before you plug the power cord into an outlet.
1-4