Canon i-SENSYS MF244dw - Manual (Page 37)

4
Select the device you are using → click [Next].
NOTE
● If the device is not displayed in [Device List], check the connection state between the computer and device
and the IP address settings, and click [Update Device List]. If the device is still not displayed, click [Search by
IP Address] → enter the IP address of the device → click [OK]. For the IP address confirmation method, refer
to the manual of the device.
5
Select the driver to install → click [Next] → set as required.
If a list of drivers corresponding to the page description language is displayed after selecting a printer driver in
the [Select Driver] screen, select the driver you are going to use.
If you want to use a print server, select the following.
● Select the [Select Driver] screen > [Canon Driver Information Assist Service] (when acquiring device
information).
● Select the [Confirm Settings] screen > [Use as Shared Printer] or [Use as Shared Fax] (when you want to use
the computer you are installing to as a print server).
6
Check the settings → click [Start].
7
Setting the default printer and test printing.
When setting as a default driver: select the driver → click [Next]
Installation Using the Installer
35