Canon i-SENSYS MF244dw - Manual (Page 23)

2
If the [Select the Type of Connection] screen is displayed, select [Network Connection]
→ click [Next].
3
Click [Install].
4
Read the license agreement → click [Yes].
5
Click [Next].
6
Select the device you are using → click [Next].
NOTE
● If the device is not displayed in [Device List], check the connection state between the computer and device
and the IP address settings, and click [Update Device List]. If the device is still not displayed, click [Search by
IP Address] → enter the IP address of the device → click [OK]. For the IP address confirmation method, refer
to the manual of the device.
7
Check the settings → click [Start].
8
Install the software according to the instructions on the screen.
Installation Using the Installer
21