MCZ Swing HYDRO - Manual (Page 45)

45
16-CLEANING AND MAINTENANCE
Technical Dept. - All rights reserved - Reproduction is prohibited
CHECKING THE INTERNAL COMPONENTS
ATTENTION!
The internal electromechanical components must only be checked by qualified personnel whose technical expertise
includes combustion and electricity.
We recommend that an annual maintenance service is carried out with a scheduled service contract. This service is essentially a visual and
functional inspection of the following components: The following is a summary of the checks and/or maintenance that are indispensable
for the correct operation of the product.
PARTS/INTERVAL 1 DAY 2-3 DAYS 7 DAYS 30 DAYS 60-90 DAYS 1 YEAR
Brazier
.
Ash pan
.
Glass
.
Lower compartment
.
Complete exchanger
.
Smoke duct
.
Door gasket
.
Internal parts
.
Flue
.
Circulation pump
.
A plate heat exchanger
.
Plumbing components
.
Electro-mechanical components
·
CLEANING THE CONTROL PANEL DISPLAY
ATTENTION!!
THE PANEL DISPLAY IS VERY DELICATE, IT IS SUPPLIED WITH A PROTECTIVE FILM.
RECOMMENDATIONS FOR CLEANING:
Clean using a soft cotton cloth, which should be dry or slightly moist.
Do not use aggressive detergents or polyester materials.
Do not use abrasive sponges or powder detergents nor solvents such as alcohol and petrol, since they may damage the surface of the
device.