Safety devices and alarms – MCZ Swing HYDRO User Manual
Page 35
35
14-SAFETY DEVICES AND ALARMS
Technical Dept. - All rights reserved - Reproduction is prohibited
TAMPERING WITH THE SAFETY DEVICES IS PROHIBITED
If the stove is NOT used as described in this instruction booklet, the manufacturer declines all responsibility for
damage to persons and property that may arise. The manufacturer furthermore refuses to accept responsibility
for damage to persons and property arising from the failure to observe all the rules contained in the manual and
in particular:
•
All the necessary measures and/or precautions must be adopted when performing maintenance, cleaning and
repairs.
•
Do not tamper with the safety devices.
•
Do not remove the safety devices.
•
Connect the stove to an efficient smoke extraction system.
•
First, check that the environment where it is to be installed is properly ventilated.
Only after eliminating the cause of the intervention of the safety system is it possible to re-ignite the stove and thus
restore the probe's automatic operation. This manual will help you understand which anomaly has occurred, and
explain how to intervene according to the alarm message displayed on the stove.