Installation and assembly – MCZ Swing HYDRO User Manual
Page 31
29
4-INSTALLATION AND ASSEMBLY
Technical Dept. - All rights reserved - Reproduction is prohibited
LOADING THE PELLETS
Fuel is loaded from the upper part of the stove by lifting the door. Slowly pour the pellets into the hopper.
Never remove the protection grid inside the hopper. When loading, do not let the pellet bag come into contact with
hot surfaces.
No other type of fuel other than pellets is to be inserted into the hopper, in compliance with above-mentioned
specifications.
Store the spare fuel at an adequate safe distance.
Do not pour pellets directly onto the brazier but only into the hopper.
Most of the stove surfaces are very hot (door, handle, glass, smoke outlet pipes, hopper door etc.), therefore it is
recommended to avoid coming into contact with these parts without appropriate protective clothing.
CONDUIT FOR THE AUXILIARY TANK (optional)
It is possible to purchase conduit to be fastened, using four screws, to the back of the stove, in line with the knock-out panel (first the
square and then the round piece) to be removed.
This conduit makes it possible to insert pellets into the tank through an auxiliary tank (not supplied).
EXTRA TANK
LOADING THE PELLETS