MCZ Swing HYDRO - Manual (Page 21)

19
3-DRAWINGS AND TECHNICAL FEATURES
Technical Dept. - All rights reserved - Reproduction is prohibited
TECHNICAL CHARACTERISTICS SWING HYDRO
Nominal output power 24.8 kW (21328 kcal/h)
Nominal power output (H
2
O) 22.7 kW (19522 kcal/h)
Minimum power output 6.0 kW (5160 kcal/h)
Minimum power output (H
2
O) 5.0 kW (4300 kcal/h)
Efficiency at Max 91.6%
Efficiency at Min 95.1%
Temperature of exhaust smoke at Max 120 °C
Temperature of exhaust smoke at Min 70°C
Particulate / OGC / Nox (13%O
2
) 7 mg/Nm3 - 5.4 mg/Nm3 - 138 mg/Nm3
CO at 13% O
2
at Min and at Max 0.024 – 0.008%
CO
2
at Min and at Max 5.8% - 9.5%
Smoke mass 17.1 g/sec
Max operating temperature 2.5 bar - 250 kPa
Recommended draught at Max*** power 0.10 mbar - 10 Pa***
Minimum draft allowed at minimum power 0.02 mbar - 2 Pa
Hopper capacity 106 litres
Type of pellet fuel Pellet diameter 6-8 mm and size 5/30 mm
Pellet hourly consumption Min ~ 1.2 kg/h* - Max ~ 5.2 kg/h*
Autonomy At min ~ 60 h* - At max ~ 14 h*
Heatable volume m 3 533/40 – 609/35 – 711/30 **
Combustion air inlet Ø 80 mm
Smoke outlet Ø 100 mm
Air intlet 80 cm2
Rated electrical power (EN 60335-1) 120 W (Max 430 W)
Supply voltage and frequency 230 Volt / 50 Hz
Net weight 245 kg (with ceramic cladding)
219 Kg (structure only)
Weight with packaging 265 kg/ 240 kg
Distance from flammable material (back) 100 mm
Distance from flammable material (side) 100 mm
* Data that may vary depending on the type of pellets used
** Volume that can be heated, according to the power requirement per m 3 (respectively 40-35-30 Kcal/h per m 3 )
***Value recommended by the manufacturer (non-binding) for optimal product operation
Tested according to EN 14785 in accordance with European regulation for Construction Products (EU 305/2011)