MCZ Swing HYDRO - Manual (Page 25)

P
Q
R
T
SX1
DX1
23
4-INSTALLATION AND ASSEMBLY
Technical Dept. - All rights reserved - Reproduction is prohibited
INSTALLING THE SIDE PANELS
Loosen the screws of the fastening brackets before repositioning the side panels.
• Temporarily move the two front rubber supports on which the top (detail P) is placed
• Loosen the two screws in the front bracket at the top (detail Q)
• Loosen the screws of the brackets as shown in detail R
• Loosen the screws of the bracket on the stove's base as shown in detail T.
We can now insert the side ceramic panels. To make assembly steps on the inside of the ceramic pieces easier, there is a code that
corresponds to:
SX1 - BOTTOM LEFT CERAMIC PART DX1 - BOTTOM RIGHT CERAMIC PART
SX2 - INTERMEDIATE LEFT CERAMIC PART DX2 - INTERMEDIATE RIGHT CERAMIC PART
SX3 - TOP LEFT CERAMIC PART DX3 - TOP RIGHT CERAMIC PART