On off, Emergency panel – MCZ Boxtherm 60 Pellet User Manual
Page 33

D
E
ON
OFF
31
5-EMERGENCY PANEL
Technical Dept. - All rights reserved - Reproduction is prohibited
EMERGENCY PANEL START-UP/SHUTDOWN
If the remote control is faulty or the batteries are flat, the product can be operated temporarily via the rear emergency panel.
In this configuration, the product can only work in manual mode and one of 3 power levels can be selected.
• APPLIANCE START-UP WITHOUT THE REMOTE CONTROL.
Switch the product on by bringing selector “D” to the ON position. The RED LED goes off upon start-up, whereas the GREEN LED starts
to flash until the start-up phase is complete. Once the product is running, the GREEN LED remains on.
• SELECTING THE POWER WITHOUT THE REMOTE CONTROL.
It is possible to choose between three heating powers MIN-MED-MAX (selector “E”):
The MINIMUM power corresponds to the 1st power.
The MEDIUM power corresponds to the 3rd power.
The MAXIMUM power corresponds to the 5th power.
• APPLIANCE SHUTDOWN WITHOUT THE REMOTE CONTROL.
Switch the product on by bringing selector “D” to the OFF position.
Once operation of the remote control is restored, remember to set selector “D” back to the “REMOTE” position,
otherwise the product will ignore the remote control commands.