MCZ Boxtherm 60 Pellet - Manual (Page 17)

15
3-INSTALLATION AND ASSEMBLY
TECHNICAL CHARACTERISTICS BOXTHERM 60 PELLET
Fuel type Pellets
Nominal output power 6.1 kw (5246 kcal /h)
Minimum output power 2.4 kw (2064 kcal/h)
Efficiency at Max 91,7%
Efficiency at Min 93%
Temperature of exhaust smoke at Max 150 °C
Temperature of exhaust smoke at Min 67 °C
Particulate/OGC/Nox (13% O
2
) 27 mg/Nm 3 - 7 mg/Nm 3 - 119 mg/Nm 3
CO at 13% O
2
at Min and at Max 0,03 – 0,01%
CO
2
at Min and at Max 4,1% - 6,4%
Recommended draught at Max power 0.10 mbar - 10 Pa
Recommended draught at Min power 0.05 mbar - 5 Pa
Mass of smoke at Max 6.5 g/sec
Hopper capacity 13 litres
Type of pellet fuel Pellet diameter 6-8 mm and size 5/30 mm
Pellet hourly consumption Min ~ 0.6 kg/h* - Max ~ 1.25 kg/h*
Autonomy At min ~ 14 h* - At max ~ 7 h*
Heatable volume m 3 131/40 – 150/35 – 175/30 **
Combustion air inlet External diameter 50 mm
Smoke outlet External diameter 80 mm
Air inlet 80 cm 2
Electrical power consumption Max 320 W - Med. 100 W
Supply voltage and frequency 230 Volt / 50 Hz
Net weight 80 kg
Weight with packaging 90 kg
* Data that may vary depending on the type of pellets used.
** ** Heatable volume based on the heat demand of cal/m 3 40-35-30 (respectively 40-35-30 Kcal/h per m 3 ).
Tested according to EN 14785 accordance with Directive 89/106/EC (Construction Products).
Technical Dept. - All rights reserved - Reproduction is prohibited