Installation and assembly – MCZ Boxtherm 60 Pellet User Manual
Page 21
C
E
D
C
B
B
19
3-INSTALLATION AND ASSEMBLY
The product can be installed at the desired height by constructing a suitable platform. This support must be made of non-flammable
material.
The company declines all liability for any damage to objects and persons if the above-mentioned precautions are not
complied with.
REMOVING THE COMPENSATION FRAME
In order to prevent damaging the finishing frame (C) around the hearth door, it is recommended to remove it before fastening the product
to the base (E) and put in a safe place.
HOOD VENTILATION GRILLES
Foreword
The product can be used in two different ways:
• as in insert on existing cladding.
• As a new installation.
If inserted in existing cladding, the ventilation grilles on the cladding will be used.
If used as a new installation, the company recommends installing the ventilation grilles as described in the following paragraph.
Technical Dept. - All rights reserved - Reproduction is prohibited