MCZ Boxtherm 60 Pellet - Manual (Page 27)

A
B
E
C
D
A
B
E
C
D
25
4-LCD REMOTE CONTROL
GENERAL SPECIFICATIONS OF THE LCD REMOTE CONTROL
The remote control works at a transmission frequency of 434.5 MHz.
Power the product with 3 AAA batteries as follows:
• remove the cover of the battery compartment by pressing and lifting the point indicated by the arrow.
• Insert the batteries with the correct polarity (+) and (-).
• Close the cover of the battery compartment.
Time setting is prompted automatically when then remote control is switched on.
The remote control has a special icon on the display to indicate when the batteries are almost flat. If the flat battery icon appears, the
batteries are almost flat and the remote control is about to switch off.
Used batteries must be disposed of separately in special containers.
GRAPHIC APPEARANCE
Reference will often be made to the key indications. Always keep the figure at hand for simplicity's sake.
Technical Dept. - All rights reserved - Reproduction is prohibited