Epson DLQ-3500 - Manual (Page 30)

Ribbon Cartridge (1/2)
EPSON DLQ-3500 Quick Guide
Ribbon Cartridge
Genuine EPSON ribbon cartridge
When printing becomes faint, you need to
replace the ribbon cartridge. Genuine
EPSON ribbon cartridges are designed and
manufactured to work properly with your
EPSON printer. They ensure proper
operation and long life of the print head and
other printer parts. Other products not
manufactured by EPSON may cause
damage to your printer, which is not covered
by EPSON’s warranties.
Your printer uses the following ribbon
cartridges:
Replacing the ribbon cartridge
Follow these steps to replace a used ribbon
cartridge:
1. Make sure the printer is turned off.
2. Open the printer cover by holding the
finger grips on both ends of the cover
and lifting it up. Then open the paper
bail.
w
Warning:
If you have just used the printer, the
print head may be hot; let it cool for a
few minutes before replacing the
ribbon cartridge.
3. The print head should be in the
replacement position shown in the
illustration below.
If it is not, close the printer cover and
turn the printer on to move the print
head to the replacement position. Wait a
few seconds, then turn the printer off
again and open the printer cover.
c
Caution:
Following the steps below while the
printer is turned on can damage the
printer.
EPSON black ribbon cartridge:
S015139 (long-life cartridge)
S015066 (normal cartridge)
EPSON color ribbon cartridge:
S015067