Epson Stylus Scan 2500 - Manual (Page 7)

7
System Requirements
English
System Requirements
❚ For PCs
To use your printer, you need Microsoft
®
Windows
®
95, or Windows
®
98; a CD-ROM
drive and a shielded, twisted-pair parallel cable. If you want to connect your printer to
a USB port, you need a Windows 98 pre-installed PC equipped with a USB port; and
a shielded USB cable.
Your computer should also meet the following system requirements.
Your computer dealer can help you update your system if it does not meet these
requirements.
❚ For Macintosh computers
You can use this printer with the following Apple
®
Macintosh
®
computers. You also
need a shielded USB cable.
Supported computer models
iMac Series (for USB)
USB equipped Power Macintosh G3
Your Macintosh must meet the following system requirements.
Note: Note:
❏
The amount of available memory varies according to the number and kind of
applications that are open. To see how much memory is available, choose
About This Computer from the Apple menu and refer to the memory size
(listed in kilobytes) under Largest Unused Block (1,024K=1 MB).
Minimum System Requirements Recommended System
i486/25 MHz for Windows 95
i486/66 MHz for Windows 98 Pentium or higher processor
32 MB RAM 32 MB RAM or more for
Windows 98 and 95
50 MB hard disk space for Windows 98,
and 95 50 MB or more free disk space
for Windows 98, and 95
VGA size, 16 bit color SVGA or better 24 bit color
Minimum System Requirements Recommended System
System 8.1 + iMac update 1.0 System 8.5.1 or later
7 MB of available memory
12 MB of available memory when
background printing is turned on. 14 MB or more of available memory
23 MB of available memory when
background printing is turned on.