When choosing a place for the stylus scan, Energy star compliance, Symbols used in the manual – Epson Stylus Scan 2500 User Manual
Page 6: Nergy, Tar compliance

6
ENERGY STAR Compliance
■
Do not dismantle the ink cartridges or try to refill them. Doing so may damage the
print head.
❚
When choosing a place for the Stylus Scan
■
Place the Stylus Scan on a flat, stable surface that extends beyond the base of the
machine in all directions. The Stylus Scan will not operate properly if it is tilted or
at an angle.
■
Avoid places subject to rapid changes in temperature and humidity. Also keep the
Stylus Scan away from direct sunlight, strong light, and heat sources.
■
Avoid places subject to shocks and vibrations.
■
Leave enough room around the Stylus Scan to allow for sufficient ventilation.
■
Place the Stylus Scan near a wall outlet where the power cord can be easily
unplugged.
E
NERGY
S
TAR Compliance
As an
E
NERGY
S
TAR Partner, EPSON has determined that this
product meets the
E
NERGY
S
TAR guidelines for energy efficiency.
The International
E
NERGY
S
TAR Office Equipment Program is a
voluntary partnership with the computer and office equipment industry
to promote the introduction of energy-efficient personal computers,
monitors, printers, fax machines, and copiers in an effort to reduce air pollution caused
by power generation.
Symbols Used in the Manual
w
Warnings
must be followed carefully to avoid bodily injury.
c
Cautions
must be observed to avoid damage to your equipment.
Note:
contain important information and useful tips on the operation of your Stylus Scan.