Epson Stylus Scan 2500 - Manual (Page 26)

26
Installing Ink Cartridges
c
Caution:
❏
Remove the yellow tape seals from the cartridges before installing
them; otherwise the cartridges will be damaged and will become
unusable.
❏
Do not remove the blue portion of the tape seals from the
cartridges; otherwise the cartridges will clog and become
unusable.
❏
Do not remove the tape seals from the bottom of the cartridges;
otherwise, ink will leak.
5. Place the cartridges gently into their holders with the labels face-up. The color ink
cartridge goes on the right and the black goes on the left. Do not press down on
the cartridges.
Note:
Install both ink cartridges. If either of the cartridges is not installed, the Stylus
Scan will not work.
6. Press the ink cartridge clamps down until they lock in place.
c
Caution:
Once you install the ink cartridges, do not open the clamps again until
you need to replace the ink cartridges. Opening the clamps makes the
cartridges unusable.
7. Close the maintenance and document covers. The scanner carriage will return to
the home position.