Eiki Multimedia Projector LC-X1UA - Manual (Page 5)

INTRODUCTION
The multimedia projector that combines powerful and sophisticated features with easy-to-use, intuitive controls. Built-
in multimedia features include audio, a palette of 16.77 million colors and active matrix liquid crystal display (LCD)
technology. The projector is ideal for high-performance business, training and imaging applications that demand exceptional
cob quality
COMPATABILITY
The projector is compatible with many different types of personal computers and video devices, including;
•IBM-compatible computers, including laptops, up to 1280
X 1024 resolution.
•Apple Macintosh and PowerBook computers up to 1280 x 1024 resolution.
•Various VCRs video disc players, video cameras, DVD players, satellite TV tuners or other AV equipment using any
of the worldwide video standards, including NTSC, NTSC4.43, PAL, PAL-M, PAL-N and SECAM.
IMAGE RESOLUTION
The resolution of the projector’s projected image is 1024 x 768. The projector displays computer images just as they
appear on your computer’s monitor. Screen resolutions between 1024 X 768 and 1280 X 1024 are compressed to
1024 x 768 the projector cannot display screen resolutions above 1280 X 1024. If your computer’s screen resolution is
higher than 1280 x 1024, reset it to a lower resolution before you connect the projector.
UNPACKING THE PROJECTOR
The projector comes with the parts listed below. Ch eck to find all the parts are included. If any parts are missing, contact
an authorized dealer or service station.
• Owner’s Manual.
•AC Power Cord.
• Remote Control Transmitter Unit (Two Types) and batteries.
• Lens Cover.
• Protective Dust Cover.
•VGA Cable.
•VGA/MAC Adapter.
• Mouse Cable for PS/2 port.
• Mouse Cable for ser a port.
• Mo se Cable for ADB ort.
TRADEMARKS
• Apple, Macintosh, and PowerBooks are trademarks or registered trademarks of Apple Computer, Inc.
• IBM and PS/2 are trademarks or registered trademarks of International Business Machines, Inc.
POWER REQUIREMENTS
Your projector uses nominal input voltages of 100-120 VAC. The projector
automatically selects the correct input voltage. The projector is designed
to work with single-phase power systems having a grounded neutral
conductor. To reduce the risk of electrical shock, do not plug into any other
type of power system. Consult your authorized dealer or service station
if you are not sure what type of power is supplied to your building.