Eiki Multimedia Projector LC-X1UA - Manual (Page 15)

CONNECTING THE VIDEO EQUIPMENT
CONNECTING TO THE VIDEO INPUT JACKS (1 and 2) BNC TYPE x 3
Connect to the video outputs of a VCR, video disc player, DVD player, video camera, satellite TV tuner or other AV
equipment. Connect video output from AV equipment to these jacks using the BNC cables.
The video input can be selected 3 type of the input. “COMPOSITE VIDEO”, “Y/C SEPARATE VIDEO” and
COMPONENT VIDEO {Y, Cb (B-Y), Cr (R-Y)}.
When the video equipment with COMPOSITE VIDEO type output jack is used, to select the “Video” position by video
source select. When the video equipment with Y/C SEPARATE VIDEO type output jack is used, to select the “Y, C”
position. When the video equipment with COMPONENT VIDEO {Y, Cb (8-Y), Cr (R-Y)} type output jack is used, to
select the “Y, Cb, Cr” position. (See “VIDEO SOURCE SELECT” section on page 34).
CONNECTING S-VHS VIDEO INPUT JACKS (1 and 2)
The Video input includes an extra video input jack marked S-VIDEO to allow connection to an S-VHS format VCR
that has separate Y/C video signals. The S-VIDEO jack has priority over the VIDEO jack.
CONNECTING TO THE AUDIO INPUT JACKS (1 and 2)
Connect to the audio outputs of a VCR, video disc player, DVD player, video camera, satellite TV tuner or other AV
equipment. Connect audio output from AV equipment to these jacks using the RCA cables.
• If the audio signal from the AV equipment is stereo, be sure to connect the right and left channels to the respective
right and left audio input jacks.
• If the external audio signal is monaural, connect it to the left jack.
CONNECTING TO THE VIDEO MONITOR OUTPUT JACKS (BNC TYPE x 3)
These jacks will contain the video information of the selected program source being viewed on the screen (Video 1 or
Video 2). If you have selected program source Video 2 the video signal connected to the Video 2 video input jack will
be available at the video monitor output jacks. If you select program source “Computer 1” or “Computer 2, the video
signal connected to the Video 1 video input jack will be available at the video monitor output jacks.
Connect video input from AV equipment to these jacks using the BNC cables.
CONNECTIONG TO THE S-VHS VIDEO MONITOR OUTPUT JACK
The Video monitor output includes an extra video input jack marked S-VIDEO to allow connection to an S-VHS
format
VCR that has separate Y/C video signals. The S-VIDEO jack has priority over the VIDEO jack.
CONNECTING TO THE AUDIO MONITOR OUTPUT (VARIABLE) JACKS
These jacks will contain the audio information of the selected program source being viewed on the screen (Video 1 or
Video 2). If you have selected program source Video 2 the audio signal connected to the Video 2 audio input jack will
be available at the audio monitor output jacks. If you select program source “Computer 1” or “Computer 2, the audio
signal connected to the Video 1 audio input jack will be available at the audio monitor output jacks.
Connect audio input from AV equipment to these jacks using the RCA cables.
• If the audio input of the audio equipment is stereo, be sure to connect the right and left channels to the respective
right and left jacks.
• If the audio input of the audio equipment is monaural, connect it to the left jack.