Powerfix Z31361 - Manual (Page 16)

16 GB
Use
lashing. Responsible users plan cargo security in advance: they plan
the attachment and removal of the lashing devices before the start of
the journey. With longer trips, partial unloading must be considered.
Calculate the number of lashing devices according to EN 12195-1. Only
lashing systems labelled for lashing down with STf (standard tension
force) may be used for friction lashing.
¾
Place the lashing strap around the load
¾
Open the ratchet handle
1
and place the slotted shaft
3
into the
position so that the webbing
4
can be inserted into it (see fig. A III).
¾
Insert the webbing
4
into the slotted shaft
3
of the ratchet.
Carefully pull it through the slotted shaft
3
until the webbing
4
lies
snug against the load.
¾
Tighten the lashing strap by moving the handle
1
of the ratchet
backwards and forwards (see fig. A I - III). Tighten the lashing strap
until you have obtained the tension you wish to have.
Note: Make sure that webbing
4
is wound at least 1.5 times to a
maximum of 3 times around the slotted shaft
3
.
¾
Bring the ratchet handle
1
into the basic position (see fig. A I). The
load is now secure.