Powerfix Z31361 - Manual (Page 15)

15 GB
Practical information regarding the use and care of .../Use
accidental contact with chemical products, the lashing strap must be
removed from service and the manufacturer or supplier consulted.
9. Care should be taken that the lashing strap is not damaged by the
sharp edges of the load on which it is used. Regular visual inspection
before and after each use is recommended.
10. Only legibly marked and labelled lashing straps may be used.
11. Lashing straps must not be overloaded: The maximum hand force
of 500 N (50 daN on the label; 1 daN 1 kg) may be applied with
only one hand. Mechanical aids such as bars or levers etc. may not
be used unless they are part of the tensioning device.
12. Lashing straps may not be used when knotted.
13. Damage to labels must be prevented by keeping them away from
sharp edges of the load and, if possible, from the load.
14. Webbing must be protected against friction, abrasion and damage
from loads with sharp edges by using protective sleeves and / or
corner protectors.
˜
Use
˜
Attaching the lashing strap
The selected lashing equipment must be strong and long enough
for the intended purpose and have the correct length for the type of