Cleaning and maintenance, Disposal – Powerfix Z32118 User Manual
Page 11
GB
10
Failure
Cause
Solution
The LCD dis-
play
3
does
not continue to
count.
Faulty wiring or
circuit
Remove battery
and re-insert after
30 seconds.
Nothing is dis-
played on the
LCD display
3
.
1. LCD display is
switched off.
2. Battery is the wrong
way round or the
battery contact is
poor.
3. The battery voltage
is lower than 2.4 V.
1. Switch the LCD
display on by
pressing the ON /
OFF key
5
.
2. Remove the bat-
tery and insert /
replace it in line
with the terminals
and the chapter
“Inserting / repla-
cing the battery”
so that it touches
all contacts.
3. Replace the bat-
tery in line with
the chapter “In-
serting / repla-
cing the batte-
ry”.
Q
Cleaning and maintenance
j
Clean the angle ruler before and after using it.
j
Do not immerse the angle ruler into water. Liquids can
damage the angle ruler.
j
Use a dry cloth to clean the casing; never use petrol,
solvents or cleaning agents
j
Always switch the LCD display
3
off when not using the
angle ruler. This will extend the life of the battery.
j
Keep away from electrical current and electrically charged
pens to prevent damage to the chip.
Q
Disposal
The packaging is made entirely of recyclable
materials, which you may dispose of at local
recycling facilities.
Contact your local refuse disposal authority for more details of
how to dispose of your worn-out product.
To help protect the environment, please dispose of the
product properly when it has reached the end of its
useful life and not in the household waste. Information
on collection points and their opening hours can be
obtained from your local authority.