Ericsson A1018 - Manual (Page 65)

Not
f
or Com
mercial
Use
E
ri
cs
s
on M
obile Com
m
unicat
ions
A
B
64 Calling Card or Credit Card Calls
2. Enter your security code and press Y E S .
To change security codes, see above.
3. Select card position (Card 1 or Card 2).
4. Enter the access number (the phone number) to the calling card
server. The numbers are entered in the same way as in the ordinary
Phone book.
5. Press L E F T or R I G H T .
6. Enter the verification code to your calling card server.
7. To store the calling card number, press
Y E S .
Changing the dialling order
Since the dialling order (whether you have to dial your verification
code before or after the number you want to dial) may vary between
calling card servers, you can change the order yourself.
•
Use the * or # key, when the Called no. row flashes.
If you have stored two card numbers, you must select which card you
wish to use before making a Calling/Credit card call.
To select the card
1. Scroll to Phone book , Y E S , Call card numbers , Y E S .
2. Enter your security code and press Y E S .
3. Scroll to the card you wish to use.
Your settings for the card appear. To select the card, press Y E S .
Note! If you use only one card number, this selection does not have to
be repeated every time you wish to make a Calling/Credit card call.
1. Enter the number you wish to dial, or retrieve it from the Phone
book.
2. Press and hold Y E S .
The access number to the calling card server is called and during
the connecting phase, you are prompted to send the called number
(the number or the person you want to call) and the verification
code, in the order chosen by you (see above).
3. To send the called number and the verification code during the
connecting phase, press Y E S when the display shows Send , or wait
a few seconds and your phone will send them automatically.
SELECTING A CARD
MAKING A CREDIT OR CALLING CARD CALL