Main menu, 1 setup id – EverFocus EHD650 User Manual

Page 17

Text mode
Original mode

- 17 -

4. MAIN MENU

4.1 Setup ID

Camera Menu: Display ID/Camera ID/ID position

DISPLAY ID: ON/OFF.

The camera ID can be displayed on the screen by setting “ON”.

CAMERA ID: When “ON” is selected, user can set the Camera ID up to 12
characters. Please refer to the table below for detailed character patterns. Use the
cursor button e or f to locate characters (characters will display in the same
order as shown in table), press the SET button to choose the character. Use the
cursor button f to move to the next character for setting.
Once the characters of camera ID are all selected, press the SET button for 1 sec

to close the menu and the Camera ID will show on the screen as the figure below.

CAMERA ID MENU

> DISPLAY ID ON

CAMERA ID:

ID POSITION UP-LEFT

PREVIOUS PAGE.

MAIN MENU

>SETUP ID..

LENS DC..

WDR..

WB CONTROL ATW

AGC ON

LOW LIGHT SLOW-SH..

SYNC..

DAY/NIGHT

EXIT MENU

Ex: CAMERA ID: EverFocus

101