Extreme Networks Summit 300-48 - Manual (Page 101)

Configuring Power Over Ethernet
Summit 300-48 Switch Software User Guide 101
unconfig inline-power operator-limit ports Resets the operator limit back to the
default.
unconfig inline-power violation-precedence ports Resets the violation precedence back to
the default.
unconfig inline-power reserved-budget ports Resets the reserved budget back to the
default (0 milliwatts).
config inline-power priority [low | high | critical] ports Configures the port priority. Power
allocation is provided first to higher priority
ports. The default value is low.
unconfig inline-power priority ports Resets the port priority to the default (low).
clear inline-power stats Clears inline power stats on the specified
ports.
Table 37: PoE Show Commands
Command Description
show inline-power Displays inline power status information for
the system.
show inline-power configuration port Provides inline power information for the
specified port(s).
show inline-power slot Provides inline configuration information
for the specified slot(s).
show inline-power stats slot Provides inline power statistics for the
specified slot(s). Prints out how many
ports are faulted, powered, and waiting for
power for the slot.
show inline-power configuration slot Provides power configuration for each slot.
show inline-power info [detail] port Provides power configuration details for
the port.
show inline-power stats port Shows status of power for the port.
Table 36: Power Over Ethernet Configuration Commands (continued)
Command Description