Epson 1680 - Manual (Page 107)

100
Using Optional Equipment
4. Place the 35 mm filmstrip
guide on the document table,
and align it with the ruled edges
of the document table.
5. Close the TPU and begin
scanning.
Make sure to select TPU for Neg. Film or TPU for Pos. Film as your
Document Source in EPSON TWAIN Pro.
If a color stripe appears when scanning film (known as “Newton’s ring”),
try scanning the film upside down.
Loading 35 mm slides
Follow these steps to load 35 mm slides:
1. Load slides in the 35 mm slide holder as
shown. Make sure the glossy side of each
slide faces down, and the film emulsion
layer faces up.
2. Position the slide holder on
the document table. Align the
slide holder with the ruled
edges of the document table.
3. Close the TPU and begin your
scan.
If you’re using EPSON TWAIN Pro to scan, make sure to select TPU for
Pos. film as your Document Source.
1680.book Page 100 Thursday, March 1, 2001 4:28 PM