Elation Professional CMY Zoom 250 - Manual (Page 7)

CMY ZOOM 250 ™
©Elation Professional® Los Angeles, Ca. 90058 - CMY ZOOM 250™ - -
While choosing the installation-spot, please make sure that the device is not exposed to
extreme heat, moisture or dust. The minimum distance between light-output from the
projector and the illuminated surface must be more than 0,5 meter.
Always fix the fixture with an appropriate safety cable if you use the clamp to hang up the
fixture. When fixing the device on a raised-from-the- ground support, be sure to use no less
than screws and nuts of M10 x 25 mm and insert them in the pre-arranged screw holes in
the base of the fixture.
If you use the quick lock cam in hanging up the fixture, please make sure the 4 quick lock
fasteners turned in the quick lock holes correctly.
Operate the device only after having familiarized with its functions. Do not permit operation
by persons not qualified for operating the device. Most damages are the result of
unprofessional operation.
Please use the original packaging if the device is to be transported.
For safety reasons, please be aware that all modifications on the device are forbidden.
If this device will be operated in any way different to the one described in this manual, the
product may suffer damages and the guarantee becomes void. Furthermore, any other
operation may lead to short-circuit, burns, electric shock, lamp explosion, crash, etc.