Elation Professional CMY Zoom 250 - Manual (Page 14)

CMY ZOOM 250 ™
©Elation Professional® Los Angeles, Ca. 90058 - CMY ZOOM 250™ - -
The electric connection must only be carried out by a qualified electrician.
Secure the CMY ZOOM 250™
Regardless of the rigging option you choose for your CMY ZOOM 250™ always be sure to
secure your fixture with a safety cable. The fixture provides a built-in rigging point for a safety
cable on the underside of the fixture, be sure to use this point and never secure a safety
cable to a carrying handle.
Clamps
The CMY ZOOM 250™ has been designed to hold multiple clamps to the bottom of the unit
in several different orientations. Always use an appropriately rated clamp to mount this unit
to truss. Refer to the printed instructions on the bottom of the fixture for proper clamp
installation.
Installation method via clamp
Please refer to the picture below:
Screw one clamp each via a M10 screw and nut directly into the bracket of the
scanner. Pull the safety-chain through the bracket of the base and over the trussing
system or any safe fixation point.