Elation Professional CMY Zoom 250 - Manual (Page 13)

CMY ZOOM 250 ™
©Elation Professional® Los Angeles, Ca. 90058 - CMY ZOOM 250™ - -
Preparation and Installation
Mounting the device
Refer to regulations BGV C1 (formerly VBG 70) and DIN VDE 0711-217 for
proper installation in Europe
To ensure proper installation, only qualified staff should attempt installation.
The installation must always be secured with a secondary safety attachment, e.g. an
appropriate safety cable.
Never stand directly below the device when mounting, removing or servicing the fixture.
Before taking into operation for the first time,
the installation has to be approved by an expert.
Cautions:
Be sure to install this fixture outside any areas where persons may reach it and out of any
walkways.
When installing the device, make sure there is no highly
inflammable material within a distance of min. 0,5m
Overhead mounting requires extensive experience, including amongst others calculating
working load limits, installation material being used, and periodic safety inspection of all
installation material and the device. If you lack these qualifications, do not attempt the
installation yourself. Improper installation can result in bodily injury.