Enterasys Networks Wireless Ethernet Adapter I - Manual (Page 77)

B-3
Situation Problem Steps to take
The Ethernet Adapter
is connected to an
Ethernet cable, but the
Ethernet Link Light is
not lit. Invalid connection to
Ethernet
• Verify that both ends of the
cable are plugged in securely.
• If the Ethernet Adapter is
attached to a hub, a crossover
Ethernet cable must be used.
If the Ethernet Adapter is
attached directly to an
Ethernet device (i.e., a PC or
Ethernet printer), it must be a
straight-through cable. Verify
that you are using the
correct cable.
• If you are using the correct
cable, verify that you are
connecting the Ethernet
Adapter to a 10BaseT
Ethernet device. The Ethernet
Adapter does not
support 100BaseT.