Enterasys Networks Wireless Ethernet Adapter I - Manual (Page 25)

Installation 3-3
Installation Procedure
5) Gently insert PC card (face up) into the designated slot as shown in
Figure 3-3 .
Figure 3-3: Inserting the PC Card
6) Replace the cap on the Ethernet Adapter that you removed in step 3 by
snapping the cap straight down on the body.
7) If you are mounting the Ethernet Adapter, install the bottom mounting plate
where desired as shown in
Figure 3-4 . Then, place the Ethernet Adapter onto
the mounting plate and snap it into place. Ensure that the Ethernet Adapter is
secure.
Figure 3-4: Installing the Mounting Plate (Optional)
8) Connect a standard, straight-through 10BaseT Ethernet cable between the
RJ-45 port on the Ethernet Adapter and the network port on the computer
where you will install the Ethernet Adapter Manager configuration software.
EN
JO
Y
TH
E FREEDO
M O F W
IRELESS NETW
O RK
ING
W IRELESS LA
NS
802.1 DS High Rate
Hi-Gigabit Matched
Adapter
Wi
Fi