Ericsson LBI-39169 User Manual
Page 67
PROCEDURES
LBI-39169
67
HP application which finds IPs. It is also possible that directly connected elements may be added prior to their discovery by
the IPMAP application. Care must be taken to ensure that the object created is also used by IPMAP. Not only must the
selection name equal the IP address, but the IP Host Name must equal the Host Name that IPMAP will find. Note that by
associating the EDACS icon with the same object defined by the IPMAP application, the directly connected element will have
a child submap containing icons representing the interfaces defined in MIB-II (i.e., the IP interface group will have an icon).
The parent of this child submap is in the IPMAP screens, not the EDACS-created screen. This feature can aide in network
connection debugging. Namely, to see where this element is in the overall network, enter the IP child map and select the
"parent" button.
Use the following procedure to add a connection between two symbols on an OpenView map
1. Select
the
EDIT->Add Connection menu item from the OpenView main menu bar. An Add Connection window
will appear.
2. Select the representation for the connection type by clicking on the representation with the left mouse button.
3. The Add Object window appears.
4. Select the source symbol.
5. Select the destination symbol.
14.8 CUSTOMIZING MSM/SM SITE/DEVICE LABELS
Use the following procedure to customize the site or device labels.
1. As root user perform the following:
>
cd /usr/EDACS/nls/C
2. Edit the MSM message file, /usr/EDACS/nls/C/msm_msg.msg or the SM message file,
/usr/EDACS/nls/C/sm_msg.msg, to reflect the new label(s).
>
chmod 777 /usr/EDACS/nls/C/msm_msg.msg
or
>
chmod 777 /usr/EDACS/nls/C/sm_msg.msg
3. Invoke the vuepad and edit the files as required. See the following examples.
For example, if you want to change the label for site 1 from “Site 1” to “Candlers” change the line for site 1 as
follows:
As reads:
25014 “Site 1” Site_1_label
Change to read:
25014 “Candlers” Site_1_label
NOTE
There is only one Site X label. Modification of the Site X label will be reflected in all nodes. Remember, Site labels
may be up to eight (8) characters long and Device labels may be up to ten (10) characters long.
To change a device label for site 1 from “Device 33” to read “Dallas” change the line as follows:
As reads:
15021 “Device 33” Device_33_label
Change to read:
15021 “Dallas” Device_33_label
NOTE