Ericsson LBI-39169 - Manual (Page 22)

LBI-39169 STARTUP PROCEDURES
22
5.2 ENDING A NETWORK MANAGER WORK SESSION
Use the following procedures to properly end a work session.
CAUTION
When you finish a working session, DO NOT turn off the Network Manager Station. This equipment is part of a
multi-user network, and other people may be using it. If you turn off the Network Manager station, you will deny
them access to it.
NOTE
If a complete system shutdown is required, refer to the System Shutdown Procedures after logging out.
5.2.1 LOGGING OUT OF THE NETWORK MANAGER SESSION
To exit the Network Management session, perform the following:
1. From any Network Management submap, select File->Exit from the menu bar.
2. OpenView will display a Warning popup menu, indicating your session is ending. Click on OK to end the session.
3. OpenView will close all applicable files and return to the HP VUE screen.
5.2.2 LOGGING OUT OF THE HP VUE SESSION
To completely exit the HP VUE session, perform the following:
1. Click on the EXIT button on the HP VUE Front Panel.
2. The Session Manager will prompt you with the Logout Confirmation popup menu.
This popup menu will indicate “This session not saved. Instead your Home Session will be restored upon startup.”
This is normal operation configured into the system during installation. If it is necessary to make changes to the
Startup Session, consult with your Network Administrator.
3. Click OK to continue the logout process.
4. After logging out, the terminal will return to the Login screen.
NOTE
CAUTION