Startup procedures – Ericsson LBI-39169 User Manual
Page 21
STARTUP PROCEDURES
LBI-39169
21
5. STARTUP PROCEDURES
Use the following procedures to login and start a Network Manager work session. A Network Manager work session is
described as the time between logging in and logging out.
5.1 STARTING A NETWORK MANAGER WORK SESSION
The Ericsson Login Screen is the gateway to the Network Management System. After entering your login name and
password, the session will start by displaying HP VUE (Visual User Environment) screen containing the HP VUE Front
Panel.
Login into the Network Management system by using the following procedures:
1. Select the Login box and enter your login name.
Press the
place the cursor in the Password box.
2. Type in your password. Press the
button or click on OK.
If the Login Manager does not recognize your
name or password, click on CLEAR and reenter
the information.
3. Successfully logging into the HP OpenView
session will result in displaying the HP VUE
Front Panel.
4. Start the Network Manager application by clicking on the EDACS icon. The terminal will display a READ version
Network Management Home submap.
Additionally, a popup message will be displayed indicating the Polling Status and the Clock Synchronization Source.
5. You are now able of retrieve and view those Network Management attributes authorized by your Network
Administrator.
Figure 4 - Network Manager Login Dialog Box
Figure 5 - Network Manager Login Dialog Box
EDACS Icon