Bc / bpc (break point clear), Bs (sequential break), Bc / bpc – Epson S5U1C63000A User Manual
Page 200
CHAPTER 8: DEBUGGER
186
EPSON
S5U1C63000A MANUAL
(S1C63 FAMILY ASSEMBLER PACKAGE)
bc / bpc
(break point clear)
Function
This command clears the specified breakpoints that have been set.
Format
>bc [
↵
(direct input mode)
Examples
>bp
↵
1: 0116
... Breakpoints that have been set.
2: 0200
3: 0260
1. set 2. clear 3. clear all ...?
↵
>bc 200
↵
... Clears breakpoints at address 0x0200.
>bp
↵
1: 0116
2: 0260
1. set 2. clear 3. clear all ...?
↵
>bc
↵
... Clears all breakpoints.
>bp
↵
No PC break is set.
1. set 2. clear 3. clear all ...?
↵
>
Notes
• The bc and bpc commands have the same functions.
• If no address parameter is specified, all the breakpoints that have been set are cleared.
• The format of parameters is same as the bp command. You can also use the guidance input mode of bp
command to do the same operation.
• You can use this command for multiple times to clear breakpoints.
• An error results if an address that is not set at a breakpoint is specified.
Error : Input address does not exist
GUI utility
[Break | Breakpoint Set …] menu item
When this menu item is selected, a dialog box appears for clearing breakpoints. (See the bp com-
mand.)
[Break] button
When this button is clicked after placing the cursor to a break address line in the [Source] window, the
breakpoint is cleared. If the address has not been set as a breakpoint, this button sets a new breakpoint
at the address.
[Break] button