Epson S5U1C63000A - Manual (Page 108)

CHAPTER 5: LINKER
94 EPSON S5U1C63000A MANUAL
(S1C63 FAMILY ASSEMBLER PACKAGE)
5.4 Messages
The linker delivers all its messages to the Standard Output (stdout).
Start-up message
The linker outputs only the following message when it starts up.
Linker 63 Ver x.xx
Copyright (C) SEIKO EPSON CORP. 1998-2001
End message
The linker outputs the following messages to indicate which files has been created when it ends
normally.
Created absolute object file
Created absolute list file
Created map file
Created symbol file
Created cross reference file
Created error log file
Link 0 error(s) 0 warning(s)
Usage output
If no file name was specified or an option was not specified correctly, the linker ends after delivering
the following message concerning the usage:
Usage: lk63 [options]
Options: -d Disable full branch optimization
-dr Disable removal branch optimization
-e Output error log file (.ERR)
-g Add source debug information
-l Output absolute list file (.ALS)
-m Output map file (.MAP)
-o Specify output file name
-s Output symbol file (.SYM)
-x Output cross reference file (.XRF)
-code
When error/warning occurs
If an error takes place, an error message will appear before the end message shows up.
Example:
Error: Cannot create absolute list file TEST.ABS
Link 1 error(s) 0 warning(s)
In the case of an error, the linker ends without creating an output file.
If a warning is issued, a warning message will appear before the end message shows up.
Example:
Warning: No debug information in TEST.O
Link 0 error(s) 1 warning(s)
In the case of a warning, the linker ends after creating an output file, but the result cannot be guaran-
teed.
For details on errors and warnings, refer to Section 5.12, "Error/Warning Messages".