Epson S5U1C63000A - Manual (Page 199)

CHAPTER 8: DEBUGGER
S5U1C63000A MANUAL EPSON 185
(S1C63 FAMILY ASSEMBLER PACKAGE)
GUI utility
[Break | Breakpoint Set...] menu item
When this menu item is selected, a dialog box appears for setting breakpoints.
To set a breakpoint, select a [Set] button and
enter an address in the text box corresponding
to the selected button.
When setting more than four breakpoints, click
the [Next] button to continue settings.
The [Previous] and [Next] buttons are used to
view previous and subsequent four
breakpoints.
To clear a breakpoint, select the [Clear] button
of the address to be cleared.
The [Clear All Breakpoint] button clears all the
set breakpoints
[Break] button
When this button is clicked after placing the cursor to a line in the [Source] window, the address at the
cursor position is set as a breakpoint. If the address has been set as a breakpoint, this button clears the
breakpoint.
[Break] button
The set breakpoints are marked with a ● at the beginning of the address lines in the [Source] window.